Application material system
LNG / LN2 / LOX Storage & Transport
Reduce heat leak and boil-off in vacuum-insulated tanks and transport vessels while keeping the insulation package practical to install and inspect.
East Far material scope
Relevant East Far products
CryoMLI 101
Fire-resistant MLI option for cryogenic vessels and systems where oxygen-service considerations may apply.
CryoMLI 102
Low-emissivity MLI for cryogenic storage, transfer, spacecraft thermal control, and superconducting systems.
CryoMLI 202
General cryogenic MLI for tanks, piping, cold boxes, superconducting cables, and research systems.
CryoMLI 212
Flexible MLI option for cryogenic vessels, piping, cold boxes, and power systems.
CryoTape AlF
Cryogenic aluminum-foil tape for localized fixing and securing of MLI in low-temperature systems.
CryoTape ACP
Cryogenic tape for MLI overlap sealing and lightweight fixing.
CryoTape MAP
Strong-adhesion cryogenic tape for LNG and LH2 material packages, MLI fixing, and external thermal-protection assemblies.
CryoFiG Fabric
Outer protection and reinforcement fabric for cryogenic material packages.
CryoGetter / Vacuum Support
Vacuum-maintenance support for MLI plus adsorbent vacuum-insulation systems.
Engineering scope
Key engineering challenges
- Control radiation and residual-gas heat transfer
- Maintain layer density around supports and penetrations
- Select oxygen-compatible materials and cleaning controls when LOX service applies
System layers
- 01 Cold boundary
Tank or process vessel surface prepared to the project specification.
- 02 Core insulation
CryoMLI reflective and spacer structure selected for temperature, vacuum, and installation density.
- 03 Fixing and seams
CryoTape used only where needed to control edges, overlaps, and handling.
- 04 Protection and vacuum support
CryoFiG reinforcement and separately selected adsorbent materials where the vessel design requires them.
Supporting materials and supply boundaries
East Far Cryo supplies cryogenic insulation materials, related processing, and material-selection support. Equipment and system responsibilities remain with the project owner and equipment designer.
- Outer jacket, structural supports, seals, valves, and vacuum hardware are equipment-system items and are not represented as East Far Cryo-manufactured equipment.
- Adsorbent type, quantity, containment, and activation are confirmed with the vessel designer.
- Cleaning and oxygen-service approval remain subject to the customer's documented safety process.
Parameters needed for quotation
- Cryogenic medium and normal / transient operating temperatures
- Target vacuum level, pump-down method, hold time, and expected residual-gas load
- Equipment geometry, dimensions or surface area, penetrations, and installation access
- Target heat leak or required layer count and any governing acceptance method
- Required delivery form: rolls, slit widths, sewn blankets, profile-cut parts, or installation kits
- Transport vibration, orientation, and applicable oxygen-service requirements
Downloads and technical contact
CryoMLI Series Product Brochure
Product structures, specifications, and application notes for CryoMLI materials.
CryoTape Series Product Brochure
Cryogenic tape structures, temperature ranges, and fixing recommendations.
MLI Technical Reference
Engineering reference for MLI material selection, vacuum, heat flux, and layer density.
We will review your application parameters and reply by email with any clarification questions and the next material-selection step.