Application material system
Liquid Helium / MRI / Superconducting Magnets
Control heat leak at 4K while preserving vacuum stability, clean installation, thermal-cycle durability, and service access around magnet systems.
East Far material scope
Relevant East Far products
CryoMLI 102
Low-emissivity MLI for cryogenic storage, transfer, spacecraft thermal control, and superconducting systems.
CryoMLI 302
Open spacer structure for high-vacuum cryogenic systems, superconducting systems, and spacecraft MLI blankets.
CryoTape AlF
Cryogenic aluminum-foil tape for localized fixing and securing of MLI in low-temperature systems.
CryoTape ACP
Cryogenic tape for MLI overlap sealing and lightweight fixing.
CryoTape PI
High-temperature and cryogenic-compatible tape for aerospace, superconducting, and research systems after project review.
CryoFiG Fabric
Outer protection and reinforcement fabric for cryogenic material packages.
CryoGetter / Vacuum Support
Vacuum-maintenance support for MLI plus adsorbent vacuum-insulation systems.
Engineering scope
Key engineering challenges
- Avoid layer compression and thermal bridges
- Control outgassing and particulate contamination
- Accommodate shields, leads, supports, and service openings
System layers
- 01 4K boundary
Cryostat or cold-mass surface and intermediate shields defined by the system designer.
- 02 Reflective insulation
CryoMLI 102 or 302 configured for boundary temperatures and available installation volume.
- 03 Controlled fixing
CryoTape selected for localized seams and handling, with vacuum compatibility reviewed.
- 04 Protection
CryoFiG used where abrasion or handling protection is needed without compressing the MLI.
Supporting materials and supply boundaries
East Far Cryo supplies cryogenic insulation materials, related processing, and material-selection support. Equipment and system responsibilities remain with the project owner and equipment designer.
- Cryostat, magnet, current leads, thermal shields, supports, and vacuum hardware remain equipment-designer responsibilities.
- Electrical insulation and quench-safety materials require separate system qualification.
- Cleanliness, particulate, and outgassing limits must be supplied by the project.
Parameters needed for quotation
- Cryogenic medium and normal / transient operating temperatures
- Target vacuum level, pump-down method, hold time, and expected residual-gas load
- Equipment geometry, dimensions or surface area, penetrations, and installation access
- Target heat leak or required layer count and any governing acceptance method
- Required delivery form: rolls, slit widths, sewn blankets, profile-cut parts, or installation kits
- Cold-mass and shield temperatures, magnetic / electrical restrictions, and cleanliness class
Downloads and technical contact
CryoMLI Series Product Brochure
Product structures, specifications, and application notes for CryoMLI materials.
CryoTape Series Product Brochure
Cryogenic tape structures, temperature ranges, and fixing recommendations.
MLI Technical Reference
Engineering reference for MLI material selection, vacuum, heat flux, and layer density.
We will review your application parameters and reply by email with any clarification questions and the next material-selection step.